Recent Posts

Pages: [1] 2 3 ... 10
1
PENN REELS / Re: Damaged 14/0 off e-bay
« Last post by Wompus Cat on June 09, 2024, 05:56:53 AM »
MEANWHILE

 I repaired the Damage .

Other than the Busted Side Plate ,Missing Screw ,Frozen Pinion Gear,(which made it most difficult but not impossible to dis-assemble),a few cracked Rings, Buggered up Sleeve where the Reel was used for Dribbling Practice during U.S.P.S. safe handling trip to me  ,   Missing Handle , and Rusty Main Gear this Reel looks like it had a lot of Bottom Time if you catch my Drift and Sponge Bob will miss it off his Mantle the Reel was hardly used as the Drags and washers show very little if ANY wear.
 Click on image to enlarge  Click again  on that image  to Super Size . Click on Paper Clip to download image  A little more sanding and some polishing it will be good as new .
2
PENN REELS / Re: Damaged 14/0 off e-bay
« Last post by Wompus Cat on June 05, 2024, 04:12:53 PM »
Well after back and forth picture  and messaging the seller partially refunded me on my request  so everything is Peachy here .
They will receive positive Feed Back from me .
3
PENN REELS / Re: Damaged 14/0 off e-bay from gamangaman
« Last post by John Holmes on June 04, 2024, 11:36:03 AM »
Reels of that Size need 3 inch Foam Rubber on all sides MINIMUM when shipping across the street must less interstate .
I Recently acquired a 16/0 shipped from France and the Shipper did a Great job with Heavy Foam and a large Box. .
Looks like the shipper for the 14/0 used a bit of cardboard and some tiny bubble Wrap .
That simply  won't do for those heavy Reeels.
Top , Bottom and sides Have to have proper THICK FOAM to insure it will arrive damage Free

Don't know what you paid for it but I would say he owes you at least 150 dollars for the Damage Refund .
4
PENN REELS / Damaged 14/0 off e-bay
« Last post by Wompus Cat on June 03, 2024, 03:37:49 PM »
Got this off E-Bay the other Day and bought as is and  a Parts Reel in the Description  However the As Is I bought was not the AS Is I Received as the one I bought did NOT have a Broken Side Plate   I am working with the seller and he has been communicating with me and apparently the photos I send using e-bays add picture feature is Nicht Gute sooooo here are some photos to see  .

Reel I Purchased shows no damage to Handle Side Plate around the Bearing area as well as #s 1.2.8.9.and 10 in his Listing

https://www.ebay.com/itm/276473853857

Reel without damage on the listing



Here is The Reel as I Received it



Clearly Not the As IS  as IT Was.....lol

Hope to work things out  but the reason I bought this Parts Reel was for those Parts that were AS IS that are now NOT AS WAS ....lol

Seller Requested photos of box and packing so Here we go.



 Unfortunately  he /they did not put enough heavy insulation in bottom  and sides for the amount this Reel  Weighs and it literately impacted itself during transport . Happens all the time




5
TIBURON ENGINEERING / SPOOLS
« Last post by Bob Clifton on May 31, 2024, 07:58:39 PM »
Can't  figure out the site but was wondering IF they make Stock Aluminum Spools in colors for the Penn 113H ?
6
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Wompus Cat on May 15, 2024, 07:25:52 PM »
I got 2 Reels at the NFLCC meet last week and bought a Box with tools and papers off Flee Bay this week .
One of the Reels just needed the ol grease cleaned out and looks NEW .
7
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Hytekrednek on May 15, 2024, 04:41:39 PM »
Thanks for helping locating these parts.
I got another Bantam 100 a few weeks ago. It cane with the rod I wanted, A Bantam Boron with the Colfor pistol grip. Very nice!  The rod is like new, but the reel shows good bit of wear. I will probably just keep it for a parts reel.
8
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Wompus Cat on May 07, 2024, 07:55:45 AM »
Went to the local Temple Texas NFLCC Meet last week end and met a lot of New peeps . Put the word out there for parts .Might turn up something .Ended up buying 2 but too nice to part out .  One in the Box.
While loading stuff to take I found another Box of NOS SHIMANO parts but not had ime to run through them . As many of those made somebody HAS TO HAVE A BUNCH somewhere . My bud in Calee forny has not found any yet but I BET a Dollar to a Rolling Do Nut he has em .
If you want to hep out around here talk the site up ,get some NEW BLOOD, post Pix , talk about fishing stuff/whatever ......
9
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Hytekrednek on May 06, 2024, 09:53:51 PM »
Thank you wompas cat! for looking and trying to help me find them. Hope I can repay the favor one day. Just let me know how I can help...
10
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Hytekrednek on May 06, 2024, 09:52:19 PM »
I got a Guy in California has THOUSANDS of old stock parts and he is looking . I have not found any in my stash but still looking .
See em on e-bay recently  if you want to try that.

I check ebay often. Lots of used parts, few new old stock. I did find a couple nos gears last year on ebay for these reels. I still need/want a few more. Especially need some pinions for the Bantam 100's  BTM0023.  I still want some more main gears too though, btm 0019. Wanting New old stock parts. Thanks for looking. If you have some new "NOS" btm0023 pinion gears, let me know you price. I am flexible.
Pages: [1] 2 3 ... 10