Here’s a few pictures of the Penn 80 and the Ocean City Brigantine. I’ll get some of the Shakespeare later but these are the most important ones to me. All i’ve done so far is spray some WD40 on the sideplates, lightly scrub w a toothbrush and take picutes.
The Penn turns very smoothly already so i don’t think it’s going to take much work.
The Ocean City is another story. Look at the screwdriver slots. They are very, very narrow. I’ve tried multiple screwdrivers and am having difficulty finding anything that fits. The reel turns but is somewhat sluggish. I’m expecting to find old, nasty grease in there but I’ve got to get in there first. Any ideas? Only
My very smallest screwdriver (the same one i use for taking put the small sideplate screws) will even fit in the slot but it’s not wide enough to get any torque behind it to get the screw turning. I have a large screwdriver that is the perect width but it’s just way too thick. I’m kind of at a loss right now.