81
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Wompus Cat on March 27, 2024, 03:16:08 PM »Ain't forgot ya just ain't found em yet .
Recent Posts
82
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Hytekrednek on March 12, 2024, 11:31:10 AM »Thank you very much.
83
Wanted / Re: Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Wompus Cat on March 05, 2024, 05:19:07 PM »I bought about a thousand or more Shimano Parts a few years back . Have not gone through all of them yet but did see some gears . Don't recall if there were any BNT numbers but will check in a day or two
84
Wanted / Need BNT 0019 and BNT 0023 for Shimano Bantam 100's
« Last post by Hytekrednek on March 05, 2024, 03:30:13 PM »I am in need of new pinion and main gears for the Shimano Bantam 100. Part numbers BNT0019 and BNT0023. I will be grateful for any, but I will buy up to 8-10 sets if available. Thanks for your time and help.
85
Wanted / Re: WTB: Penn Senator 16/0
« Last post by Crab Pot on March 03, 2024, 10:45:30 AM »Yep, I have been watching the same reels on Ebay for over a year plus that aren't selling in the $500-$1300 range.
There is a guy from France that has one as well.
The Japanese reels on Ebay, in mine and others experience, are worn out internally.
Don't even think of buying a used electric reel from Japan. I've had a couple friends get ripped off on reels that they spent north of $500 on.
The folks in Japan use their gear!
I'll find one eventually but not taking a loan out to do it.
There is a guy from France that has one as well.
The Japanese reels on Ebay, in mine and others experience, are worn out internally.
Don't even think of buying a used electric reel from Japan. I've had a couple friends get ripped off on reels that they spent north of $500 on.
The folks in Japan use their gear!
I'll find one eventually but not taking a loan out to do it.
86
Wanted / Re: WTB: Penn Senator 16/0
« Last post by Wompus Cat on March 03, 2024, 04:35:06 AM »The Elusive,Extravagant, EXPENSIVE .PENN 16/0 is about all I need for my modest Collection as well but I just can't see paying 7 hundred to 1200 or more for one .There are a few on the Bay but not so good shape and a whoppin Thousand Bux .
This one says it has a Good Engine ....lol
One or more are from Japan and the Seller has some Bad FEEDBACK as to shipping when they say Free but you get exorbitant import duties stuck on it .
I buy stuff from Japan all the time without any duties or import fees so WHADDUP wid Dat ?
Maybe it has to do with over a certain amount ?
Thought about buying the Right sideplate ,Foot, a spool and some crossbars and building one from one of my 114/0's as pieces come up now and then and that's the only difference (the Width) I understand some of the Early versions had smaller guts tho.
This one says it has a Good Engine ....lol
One or more are from Japan and the Seller has some Bad FEEDBACK as to shipping when they say Free but you get exorbitant import duties stuck on it .
I buy stuff from Japan all the time without any duties or import fees so WHADDUP wid Dat ?
Maybe it has to do with over a certain amount ?
Thought about buying the Right sideplate ,Foot, a spool and some crossbars and building one from one of my 114/0's as pieces come up now and then and that's the only difference (the Width) I understand some of the Early versions had smaller guts tho.
87
Wanted / WTB: Penn Pro Mag 970 Non-Handle Side Ring
« Last post by Crab Pot on March 02, 2024, 11:30:57 AM »WTB:
Penn 970 Pro Mag side ring part number 2-970.
Penn 980 Pro Mag is the same part number.
If you have a set even better.
Looking for NOS or like new condition.
Thanks,
Steve
Penn 970 Pro Mag side ring part number 2-970.
Penn 980 Pro Mag is the same part number.
If you have a set even better.
Looking for NOS or like new condition.
Thanks,
Steve
88
Wanted / WTB: Penn Senator 16/0
« Last post by Crab Pot on March 02, 2024, 10:35:15 AM »WTB:
I need a Penn 16/0 to complete my Senator collection.
In no rush, I know it's the "Jaws Movie Reel" but that doesn't add value in my opinion, should have both clamps, and it must be clean cosmetically (but not perfect).
Looking for a fair deal for a decent reel.
If anyone has one hit me up.
Thanks,
Steve
Steve
I need a Penn 16/0 to complete my Senator collection.
In no rush, I know it's the "Jaws Movie Reel" but that doesn't add value in my opinion, should have both clamps, and it must be clean cosmetically (but not perfect).
Looking for a fair deal for a decent reel.
If anyone has one hit me up.
Thanks,
Steve
Steve
89
PENN REELS / Re: Bryan Young 7+1 Drag Kits for 113 H Bad Fitment ?
« Last post by Wompus Cat on February 29, 2024, 06:34:46 AM »I have never had a complaint about anything I ordered from Bryan Young and I have ordered many drag sets from his company.
I also know him personally.
If ever there was something wrong I know he would stand behind his products it and make it right.
My 2-cents-worth,
Steve
Thank you for your input . That's how things get done .
Maybe I am just the overlooked kid at the Candy Counter .
However Pictures don't lie and it is what it is . The kit I got was fubarred and when I was a contributing Member on Tiny Town I reached out to Bryan long before he got sick about it (Nearly 2 years ago )and asked for replacement parts . All I got was what I posted above .
The Fact Remains the parts I got were not cut properly whether he used a Laser or a Horse Shoe Rasp and this anomaly is posted on Mystic Parts that alterations are needed for proper fitment .
I have 2 sets of these I won't be using if anyone wants them 20 bux each shipped to U.S.A. addy's
1. For 113H (SOLD)
2. For Penn Jig Master
90
PENN REELS / Re: Bryan Young 7+1 Drag Kits for 113 H Bad Fitment ?
« Last post by Crab Pot on February 28, 2024, 08:36:07 PM »I have never had a complaint about anything I ordered from Bryan Young and I have ordered many drag sets from his company.
I also know him personally.
If ever there was something wrong I know he would stand behind his products it and make it right.
My 2-cents-worth,
Steve
I also know him personally.
If ever there was something wrong I know he would stand behind his products it and make it right.
My 2-cents-worth,
Steve